Anlage zur FSPO vom 27.05.2015 für den Master-Studiengang Produktentwicklung, Werkstoffe und Produktion an der TUHH Studiengangsleiter/-in: Prof. Dieter Krause Gesamt: 120 LP Anzahl der zu wählenden Vertiefungen: 1 | Studienplan Master Produktentwicklung, Werkstoffe und Produktion (PEPMS) | Konsolidierte Fassung für die Studienanfängerkohorte: WiSe15/16 gem. AS-Beschluss vom: 22.04.2015 und Präsidiumsgenehmigung vom: 29.04.2015 Inkrafttreten: 01.10.2015 Außerkrafttreten: 30.09.2018 |
Das offene Wahlpflichtmodul "Ausgewählte Themen der Produktentwicklung, Werkstoffwissenschaften und Produktion" kann entweder im Umfang von 6 (Alternative B) oder 12 Leistungspunkten (Alternative A) belegt werden. Es darf jedoch nicht mehrfach belegt werden.
Empf. Sem. | Modulname (deutsch) | Modulname (englisch) | Institut | P/WP (1) | GM/ OM (2) | Note | Prüfungs- form(3) | LP (4) | Name der Lehrveranstaltung(LV) deutsch | Name der Lehrveranstaltung(LV) englisch | Form LV(5) | Sprache (6) | SWS (7) | Sem. LV | |
Kernqualifikation Pflichtbereich: 42 LP Wahlpflichtbereich: 12 LP | |||||||||||||||
1 | Finite-Elemente-Methoden | Finite Elements Methods | M-16 | P | GM | Ja | Kl | 6 | |||||||
Finite-Elemente-Methoden | Finite Element Methods | VL | EN | 2 | 1 | ||||||||||
Finite-Elemente-Methoden | Finite Element Methods | HÜ | EN | 2 | 1 | ||||||||||
1 | Technische Schwingungslehre | Vibration Theory | M-14 | P | GM | Ja | Kl | 6 | |||||||
Technische Schwingungslehre | Vibration Theory | VL | DE | 3 | 1 | ||||||||||
1 | Angewandte Statistik für Ingenieure | Applied Statistics | M-3 | WP | GM | Ja | Kl | 6 | |||||||
Angewandte Statistik für Ingenieure | Applied Statistics | VL | DE/EN | 2 | 1 | ||||||||||
Angewandte Statistik für Ingenieure | Applied Statistics | HÜ | DE/EN | 1 | 1 | ||||||||||
Angewandte Statistik für Ingenieure | Applied Statistics | POL | DE/EN | 2 | 1 | ||||||||||
1 | Kontinuumsmechanik | Continuum Mechanics | M-15 | WP | GM | Ja | MdlP | 6 | |||||||
Kontinuumsmechanik | Continuum Mechanics | VL | DE/EN | 2 | 1 | ||||||||||
Kontinuumsmechanik Übung | Continuum Mechanics Exercise | UE | DE/EN | 2 | 1 | ||||||||||
1 | Nichtlineare Strukturanalyse | Nonlinear Structural Analysis | M-10 | WP | GM | Ja | Kl | 6 | |||||||
Nichtlineare Strukturanalyse | Nonlinear Structural Analysis | VL | DE/EN | 3 | 1 | ||||||||||
Nichtlineare Strukturanalyse | Nonlinear Structural Analysis | UE | DE/EN | 1 | 1 | ||||||||||
1 | Theorie und Entwurf regelungstechnischer Systeme | Control Systems Theory and Design | E-14 | WP | GM | Ja | Kl | 6 | |||||||
Theorie und Entwurf regelungstechnischer Systeme | Control Systems Theory and Design | VL | EN | 2 | 1 | ||||||||||
Theorie und Entwurf regelungstechnischer Systeme | Control Systems Theory and Design | UE | EN | 2 | 1 | ||||||||||
1 | Werkstoffmodellierung | Material Modeling | M-15 | WP | GM | Ja | MdlP | 6 | |||||||
Werkstoffmodellierung | Material Modeling | VL | DE/EN | 2 | 1 | ||||||||||
Werkstoffmodellierung | Material Modeling | UE | DE/EN | 2 | 1 | ||||||||||
1 | Wärmetechnik | Thermal Engineering | M-21 | WP | GM | Ja | Kl | 6 | |||||||
Wärmetechnik | Thermal Engineering | VL | DE | 3 | 1 | ||||||||||
Wärmetechnik | Thermal Engineering | HÜ | DE | 1 | 1 | ||||||||||
2 | Fachlabor Produktentwicklung, Werkstoffe und Produktion | Practical Course Product Development, Materials and Production | M-18 | P | GM | Nein | SA | 6 | |||||||
Fachlabor Produktentwicklung, Werkstoffe und Produktion | Practical Course Product Development, Materials and Production | FL | DE | 6 | 2 | ||||||||||
2 | Boundary-Elemente-Methoden | Boundary Element Methods | M-16 | WP | GM | Ja | MdlP | 6 | |||||||
Boundary-Elemente-Methoden | Boundary Element Methods | VL | EN | 2 | 2 | ||||||||||
Boundary-Elemente-Methoden | Boundary Element Methods | HÜ | EN | 2 | 2 | ||||||||||
2 | High-Order FEM | High-Order FEM | M-10 | WP | GM | Ja | Kl | 6 | |||||||
High-Order FEM | High-Order FEM | VL | EN | 3 | 2 | ||||||||||
High-Order FEM | High-Order FEM | HÜ | EN | 1 | 2 | ||||||||||
2 | Nichtlineare Optimierung | Nonlinear Optimization | E-19 | WP | GM | Ja | MdlP | 6 | |||||||
Nichtlineare Optimierung | Nonlinear Optimization | VL | DE | 3 | 2 | ||||||||||
Nichtlineare Optimierung | Nonlinear Optimization | UE | DE | 1 | 2 | ||||||||||
2 | Technische Akustik I (Akustische Wellen, Lärmschutz, Psychoakustik) | Technical Acoustics I (Acoustic Waves, Noise Protection, Psycho Acoustics ) | M-16 | WP | GM | Ja | MdlP | 6 | |||||||
Technische Akustik I (Akustische Wellen, Lärmschutz, Psychoakustik) | Technical Acoustics I (Acoustic Waves, Noise Protection, Psycho Acoustics ) | VL | EN | 2 | 2 | ||||||||||
Technische Akustik I (Akustische Wellen, Lärmschutz, Psychoakustik) | Technical Acoustics I (Acoustic Waves, Noise Protection, Psycho Acoustics ) | HÜ | EN | 2 | 2 | ||||||||||
3 | Projektarbeit Produktentwicklung, Werkstoffe und Produktion | Research Project Product Development, Materials and Production | Nicht definiert | P | GM | Ja | PA lt. FSPO | 12 | |||||||
3 | Technische Akustik II (Raumakustik, Berechnungsverfahren) | Technical Acoustics II (Room Acoustics, Computational Methods) | M-16 | WP | GM | Ja | MdlP | 6 | |||||||
Technische Akustik II (Raumakustik, Berechnungsverfahren) | Technical Acoustics II (Room Acoustics, Computational Methods) | VL | EN | 2 | 3 | ||||||||||
Technische Akustik II (Raumakustik, Berechnungsverfahren) | Technical Acoustics II (Room Acoustics, Computational Methods) | HÜ | EN | 2 | 3 | ||||||||||
3 | Technischer Ergänzungskurs Kernfächer für PEPMS (laut FSPO) | Technical Complementary Course Core Studies for PEPMS (according to Subject Specific Regulations) | M-17 | WP | GM | Ja | lt. FSPO | 6 | |||||||
1-3 | Betrieb & Management | Business & Management | W-1 | P | OM | 6 | Auswahl aus Katalog | ||||||||
1-3 | Nichttechnische Ergänzungskurse im Master | Nontechnical Elective Complementary Courses for Master | 0-TUHH | P | OM | 6 | Auswahl aus Katalog | ||||||||
Vertiefung Produktentwicklung Pflichtbereich: 18 LP Wahlpflichtbereich: 18 LP | |||||||||||||||
1 | Fluidtechnik | Fluidics | M-17 | P | GM | Ja | Kl | 6 | |||||||
Fluidtechnik | Fluidics | VL | DE | 2 | 1 | ||||||||||
Fluidtechnik | Fluidics | HÜ | DE | 1 | 1 | ||||||||||
Fluidtechnik | Fluidics | POL | DE | 1 | 1 | ||||||||||
1 | Methoden der integrierten Produktentwicklung | Methods of Integrated Product Development | M-17 | P | GM | Ja | MdlP | 6 | |||||||
Integrierte Produktentwicklung II | Integrated Product Development II | VL | DE | 3 | 1 | ||||||||||
Integrierte Produktentwicklung II | Integrated Product Development II | POL | DE | 2 | 1 | ||||||||||
1 | Flugzeugsysteme I | Aircraft Systems I | M-7 | WP | GM | Ja | Kl | 6 | |||||||
Flugzeugsysteme I | Aircraft Systems I | VL | DE | 3 | 1 | ||||||||||
Flugzeugsysteme I | Aircraft Systems I | HÜ | DE | 1 | 1 | ||||||||||
2 | Systems Engineering | Systems Engineering | M-25 | P | GM | Ja | Kl | 6 | |||||||
Systems Engineering | Systems Engineering | VL | DE | 3 | 2 | ||||||||||
Systems Engineering | Systems Engineering | HÜ | DE | 1 | 2 | ||||||||||
2 | Automation und Simulation | Automation and Simulation | M-4 | WP | GM | Ja | MdlP | 6 | |||||||
Automation und Simulation | Automation and Simulation | VL | DE | 3 | 2 | ||||||||||
Automation und Simulation | Automation and Simulation | HÜ | DE | 2 | 2 | ||||||||||
2 | Bildgebende Systeme in der Medizin | Medical Imaging Systems | M-3 | WP | GM | Ja | Kl | 6 | |||||||
Bildgebende Systeme in der Medizin | Medical Imaging Systems | VL | DE | 4 | 2 | ||||||||||
2 | Flugzeugsysteme II | Aircraft Systems II | M-7 | WP | GM | Ja | Kl | 6 | |||||||
Flugzeugsysteme II | Aircraft Systems II | VL | DE | 3 | 2 | ||||||||||
Flugzeugsysteme II | Aircraft Systems II | HÜ | DE | 1 | 2 | ||||||||||
2 | Kunststoffverarbeitung - Vom Molekül zum Composite Bauteil | Manufacturing with Polymers and Composites - From Molecule to Part | M-11 | WP | GM | Ja | SA | 6 | |||||||
Verarbeitung von Kunststoffen und Verbundwerkstoffen | Manufacturing with Polymers and Composites | VL | EN | 2 | 2 | ||||||||||
Vom Molekül zum Composite Bauteil | From Molecule to Composites Part | POL | DE/EN | 2 | 2 | ||||||||||
2 | Mechanische Eigenschaften | Mechanical Properties | M-9 | WP | GM | Ja | Kl | 6 | |||||||
Mechanisches Verhalten spröder Materialien | Mechanical Behaviour of Brittle Materials | VL | DE/EN | 2 | 2 | ||||||||||
Theorie der Versetzungsplastizität | Dislocation Theory of Plasticity | VL | DE/EN | 2 | 2 | ||||||||||
2 | Methodisches Konstruieren | Mechanical Design Methodology | G-2 | WP | GM | Ja | MdlP | 6 | |||||||
Methodisches Konstruieren | Mechanical Design Methodology | VL | DE | 3 | 2 | ||||||||||
Methodisches Konstruieren | Mechanical Design Methodology | UE | DE | 1 | 2 | ||||||||||
2 | Phänomene und Methoden der Materialwissenschaften | Phenomena and Methods in Materials Science | M-22 | WP | GM | Ja | Kl | 6 | |||||||
Experimentelle Methoden der Materialcharakterisierung | Experimental Methods for the Characterization of Materials | VL | DE/EN | 2 | 2 | ||||||||||
Phasengleichgewichte und Umwandlungen | Phase equilibria and transformations | VL | DE | 2 | 2 | ||||||||||
2 | Robotik und Navigation in der Medizin | Robotics and Navigation in Medicine | E-1 | WP | GM | Ja | Kl | 6 | |||||||
Robotik und Navigation in der Medizin | Robotics and Navigation in Medicine | VL | EN | 2 | 2 | ||||||||||
Robotik und Navigation in der Medizin | Robotics and Navigation in Medicine | UE | EN | 1 | 2 | ||||||||||
Robotik und Navigation in der Medizin | Robotics and Navigation in Medicine | PS | EN | 2 | 2 | ||||||||||
2 | Stromerzeugung aus Wind- und Wasserkraft | Electricity Generation from Wind and Hydro Power | V-9 | WP | GM | Ja | Kl | 6 | |||||||
Regenerative Energieprojekte in neuen Märkten | Renewable Energy Projects in Emerged Markets | PS | DE | 1 | 2 | ||||||||||
Wasserkraftnutzung | Hydro Power Use | VL | DE | 1 | 2 | ||||||||||
Windenergieanlagen | Wind Turbine Plants | VL | DE | 2 | 2 | ||||||||||
Windenergienutzung - Schwerpunkt Offshore | Wind Energy Use – Focus Offshore | VL | DE | 1 | 2 | ||||||||||
2 | Strömungsmaschinen | Turbomachinery | M-21 | WP | GM | Ja | Kl | 6 | |||||||
Strömungsmaschinen | Turbomachines | VL | DE | 3 | 2 | ||||||||||
Strömungsmaschinen | Turbomachines | HÜ | DE | 1 | 2 | ||||||||||
2 | Supply Chain Management | Supply Chain Management | W-2 | WP | GM | Ja | Kl | 6 | |||||||
Supply Chain Management | Supply Chain Management | POL | DE | 3 | 2 | ||||||||||
Wertschöpfungsnetzwerke | Value-Adding Networks | VL | DE | 2 | 2 | ||||||||||
2-3 | Ausgewählte Themen der Produktentwicklung, Werkstoffwissenschaften und Produktion (Alternative A: 12 LP) | Selected Topics of Product Development, Materials Science and Production (Alternative A: 12 LP) | M-17 | WP | OM | 12 | |||||||||
Ja | MdlP | 3 | Angewandte Automatisierung | Applied Automation | POL | DE | 3 | 2 | |||||||
Ja | Kl | 3 | Elemente Integrierter Produktionssysteme | Elements of Integrated Production Systems | POL | DE | 2 | 2 | |||||||
Ja | MdlP | 3 | Entwicklungsmanagement Mechatronik | Development Management for Mechatronics | VL | DE | 2 | 2 | |||||||
Ja | HA | 3 | Entwurfsoptimierung und Probabilistische Verfahren in der Strukturmechanik | Design Optimization and Probabilistic Approaches in Structural Analysis | SE | DE | 3 | 2 | |||||||
Ja | MdlP | 3 | Leichtbaupraktikum | Lightweight Design Practical Course | POL | DE | 3 | 2 | |||||||
Ja | Kl | 2 | Mechanismen, Systeme und Verfahren der Werkstoffprüfung | Mechanisms, Systems and Processes of Materials Testing | VL | DE | 2 | 2 | |||||||
Ja | Kl | 3 | Metallische Werkstoffe für Luftfahrtanwendungen | Metallic Materials for Aircraft Applications | VL | EN | 2 | 2 | |||||||
Ja | SA | 3 | Model-Based Systems Engineering (MBSE) mit SysML/UML | Model-Based Systems Engineering (MBSE) with SysML/UML | POL | DE | 3 | 2 | |||||||
Ja | MdlP | 4 | Optimale und robuste Regelung | Optimal and Robust Control | VL | EN | 2 | 2 | |||||||
UE | EN | 1 | 2 | ||||||||||||
Ja | Kl | 3 | Produktivitätsmanagement | Productivity Management | UE | DE | 1 | 2 | |||||||
POL | DE | 2 | 2 | ||||||||||||
Ja | MdlP | 3 | Regelungstechnische Methoden für die Medizintechnik | Feedback Control in Medical Technology | VL | DE | 2 | 2 | |||||||
Ja | Kl | 3 | Regenerative Energien | Renewable Energy | VL | DE/EN | 2 | 2 | |||||||
UE | DE/EN | 1 | 2 | ||||||||||||
Ja | HA | 3 | Technisches Industriedesign | Technical Design | VL | DE | 2 | 2 | |||||||
Ja | Kl | 4 | Zuverlässigkeit in der Maschinendynamik | Reliability in Engineering Dynamics | VL | EN | 2 | 2 | |||||||
UE | EN | 1 | 2 | ||||||||||||
Ja | MdlP | 3 | Arbeitswissenschaft | Ergonomics | VL | DE | 2 | 3 | |||||||
Ja | Kl | 3 | Aufbau und Eigenschaften der Kunststoffe | Structure and Properties of Polymers | VL | DE | 2 | 3 | |||||||
Ja | Kl | 3 | Aufbau und Eigenschaften der Verbundwerkstoffe | Structure and Properties of Composites | VL | EN | 2 | 3 | |||||||
Ja | SA | 3 | Computer- und Kommunikationstechnik bei Kabinenelektronik und Avionik | Computer and communication technology in cabin electronics and avionics | VL | DE | 2 | 3 | |||||||
UE | DE | 1 | 3 | ||||||||||||
Ja | Re | 2 | Emotional Design / Benutzerzentrierte Produktentwicklung | Emotional Design / User Centered Product Development | SE | DE | 2 | 3 | |||||||
Ja | MdlP | 3 | Ermüdung und Schadenstoleranz | Fatigue & Damage Tolerance | VL | EN | 2 | 3 | |||||||
Ja | Kl | 3 | Fügen von Polymer-Metall Leichtbaustrukturen | Joining of Polymer-Metal Lightweight Structures | VL | EN | 2 | 3 | |||||||
PR | EN | 1 | 3 | ||||||||||||
Ja | Kl | 3 | Konstruieren mit Kunststoffen und Verbundwerkstoffen | Design with Polymers and Composites | VL | DE | 2 | 3 | |||||||
Ja | MdlP | 3 | Leichtbau mit Faserverbundwerkstoffen - Strukturmechanik | Lightweight Construction with Fibre Reinforced Rolymers - Structural Mechanics | VL | DE | 2 | 3 | |||||||
HÜ | DE | 1 | 3 | ||||||||||||
Ja | Kl | 3 | Methoden des Flugzeugentwurfs I | Aircraft Design I | VL | DE | 2 | 3 | |||||||
HÜ | DE | 1 | 3 | ||||||||||||
Ja | MdlP | 4 | Mikrosystemtechnologie | Microsystems Technology | VL | EN | 2 | 3 | |||||||
Ja | Kl | 3 | Six Sigma Methodik im Qualitätsmanagement | Six Sigma | VL | DE | 2 | 3 | |||||||
Ja | Kl | 3 | Systemanalyse im Lufttransport | System Analysis in Air Transportation | VL | DE | 3 | 3 | |||||||
Ja | Kl | 3 | Technologie keramischer Werkstoffe | Ceramics Technology | VL | DE/EN | 2 | 3 | |||||||
Ja | Kl | 2 | Werkstoffprüfung | Materials Testing | VL | DE | 2 | 3 | |||||||
Ja | Kl | 3 | Zuverlässigkeit von Flugzeugsystemen | Reliability of Aircraft Systems | VL | DE | 2 | 3 | |||||||
2-3 | Ausgewählte Themen der Produktentwicklung, Werkstoffwissenschaften und Produktion (Alternative B: 6 LP) | Selected Topics of Product Development, Materials Science and Production (Alternative B: 6 LP) | M-17 | WP | OM | 6 | |||||||||
Ja | MdlP | 3 | Angewandte Automatisierung | Applied Automation | POL | DE | 3 | 2 | |||||||
Ja | Kl | 3 | Elemente Integrierter Produktionssysteme | Elements of Integrated Production Systems | POL | DE | 2 | 2 | |||||||
Ja | MdlP | 3 | Entwicklungsmanagement Mechatronik | Development Management for Mechatronics | VL | DE | 2 | 2 | |||||||
Ja | HA | 3 | Entwurfsoptimierung und Probabilistische Verfahren in der Strukturmechanik | Design Optimization and Probabilistic Approaches in Structural Analysis | SE | DE | 3 | 2 | |||||||
Ja | MdlP | 3 | Leichtbaupraktikum | Lightweight Design Practical Course | POL | DE | 3 | 2 | |||||||
Ja | Kl | 2 | Mechanismen, Systeme und Verfahren der Werkstoffprüfung | Mechanisms, Systems and Processes of Materials Testing | VL | DE | 2 | 2 | |||||||
Ja | Kl | 3 | Metallische Werkstoffe für Luftfahrtanwendungen | Metallic Materials for Aircraft Applications | VL | EN | 2 | 2 | |||||||
Ja | SA | 3 | Model-Based Systems Engineering (MBSE) mit SysML/UML | Model-Based Systems Engineering (MBSE) with SysML/UML | POL | DE | 3 | 2 | |||||||
Ja | MdlP | 4 | Optimale und robuste Regelung | Optimal and Robust Control | VL | EN | 2 | 2 | |||||||
UE | EN | 1 | 2 | ||||||||||||
Ja | Kl | 3 | Produktivitätsmanagement | Productivity Management | UE | DE | 1 | 2 | |||||||
POL | DE | 2 | 2 | ||||||||||||
Ja | MdlP | 3 | Regelungstechnische Methoden für die Medizintechnik | Feedback Control in Medical Technology | VL | DE | 2 | 2 | |||||||
Ja | Kl | 3 | Regenerative Energien | Renewable Energy | VL | DE/EN | 2 | 2 | |||||||
UE | DE/EN | 1 | 2 | ||||||||||||
Ja | HA | 3 | Technisches Industriedesign | Technical Design | VL | DE | 2 | 2 | |||||||
Ja | Kl | 4 | Zuverlässigkeit in der Maschinendynamik | Reliability in Engineering Dynamics | VL | EN | 2 | 2 | |||||||
UE | EN | 1 | 2 | ||||||||||||
Ja | MdlP | 3 | Arbeitswissenschaft | Ergonomics | VL | DE | 2 | 3 | |||||||
Ja | Kl | 3 | Aufbau und Eigenschaften der Kunststoffe | Structure and Properties of Polymers | VL | DE | 2 | 3 | |||||||
Ja | Kl | 3 | Aufbau und Eigenschaften der Verbundwerkstoffe | Structure and Properties of Composites | VL | EN | 2 | 3 | |||||||
Ja | SA | 3 | Computer- und Kommunikationstechnik bei Kabinenelektronik und Avionik | Computer and communication technology in cabin electronics and avionics | VL | DE | 2 | 3 | |||||||
UE | DE | 1 | 3 | ||||||||||||
Ja | Re | 2 | Emotional Design / Benutzerzentrierte Produktentwicklung | Emotional Design / User Centered Product Development | SE | DE | 2 | 3 | |||||||
Ja | MdlP | 3 | Ermüdung und Schadenstoleranz | Fatigue & Damage Tolerance | VL | EN | 2 | 3 | |||||||
Ja | Kl | 3 | Fügen von Polymer-Metall Leichtbaustrukturen | Joining of Polymer-Metal Lightweight Structures | VL | EN | 2 | 3 | |||||||
PR | EN | 1 | 3 | ||||||||||||
Ja | Kl | 3 | Konstruieren mit Kunststoffen und Verbundwerkstoffen | Design with Polymers and Composites | VL | DE | 2 | 3 | |||||||
Ja | MdlP | 3 | Leichtbau mit Faserverbundwerkstoffen - Strukturmechanik | Lightweight Construction with Fibre Reinforced Rolymers - Structural Mechanics | VL | DE | 2 | 3 | |||||||
HÜ | DE | 1 | 3 | ||||||||||||
Ja | Kl | 3 | Methoden des Flugzeugentwurfs I | Aircraft Design I | VL | DE | 2 | 3 | |||||||
HÜ | DE | 1 | 3 | ||||||||||||
Ja | MdlP | 4 | Mikrosystemtechnologie | Microsystems Technology | VL | EN | 2 | 3 | |||||||
Ja | Kl | 3 | Six Sigma Methodik im Qualitätsmanagement | Six Sigma | VL | DE | 2 | 3 | |||||||
Ja | Kl | 3 | Systemanalyse im Lufttransport | System Analysis in Air Transportation | VL | DE | 3 | 3 | |||||||
Ja | Kl | 3 | Technologie keramischer Werkstoffe | Ceramics Technology | VL | DE/EN | 2 | 3 | |||||||
Ja | Kl | 2 | Werkstoffprüfung | Materials Testing | VL | DE | 2 | 3 | |||||||
Ja | Kl | 3 | Zuverlässigkeit von Flugzeugsystemen | Reliability of Aircraft Systems | VL | DE | 2 | 3 | |||||||
3 | Biomaterialien und regenerative Medizin | Biomaterials and Regenerative Medicine | M-3 | WP | GM | Ja | Kl | 6 | |||||||
Biomaterialien | Biomaterials | VL | EN | 2 | 3 | ||||||||||
Regenerative Medizin | Regenerative Medicine | SE | DE/EN | 3 | 3 | ||||||||||
3 | Flugzeug-Kabinensysteme | Aircraft Cabin Systems | M-25 | WP | GM | Ja | Kl | 6 | |||||||
Flugzeug-Kabinensysteme | Aircraft Cabin Systems | VL | DE | 3 | 3 | ||||||||||
Flugzeug-Kabinensysteme | Aircraft Cabin Systems | HÜ | DE | 1 | 3 | ||||||||||
3 | Lasersysteme und Methoden der Fertigungsprozessauslegung und -analyse | Laser systems and methods of manufacturing design and analysis | M-18 | WP | GM | Ja | Kl | 6 | |||||||
Lasersystem- und -prozesstechnik | Laser Systems and Process Technologies | VL | EN | 2 | 3 | ||||||||||
Methoden der Fertigungsprozessgestaltung | Methods of Production Process Design | VL | DE | 2 | 3 | ||||||||||
3 | Nachhaltigkeit und Risikomangement | Sustainability and Risk Management | V-9 | WP | GM | Ja | SA | 6 | |||||||
Sicherheit, Zuverlässigkeit und Risikobewertung | Safety, Reliability and Risk Assessment | SE | DE | 2 | 3 | ||||||||||
Umweltschutz und Nachhaltigkeit | Environment and Sustainability | VL | EN | 2 | 3 | ||||||||||
3 | Produktions- und Logistikmanagement | Production and Logistics Management | W-2 | WP | GM | Ja | Kl | 6 | |||||||
Operatives Produktions- und Logistikmanagement | Operative Production and Logistics Management | VL | DE | 2 | 3 | ||||||||||
Strategisches Produktions- und Logistikmanagement | Strategic Production and Logistics Management | POL | DE | 3 | 3 | ||||||||||
3 | Produktplanung | Product Planning | W-7 | WP | GM | Ja | Kl | 6 | |||||||
Produktplanung | Product Planning | POL | EN | 3 | 3 | ||||||||||
Produktplanung Seminar | Product Planning Seminar | POL | EN | 2 | 3 | ||||||||||
3 | Robotik | Robotics | M-24 | WP | GM | Ja | Kl | 6 | |||||||
Robotik: Modellierung und Regelung | Robotics: Modelling and Control | VL | EN | 3 | 3 | ||||||||||
Robotik: Modellierung und Regelung | Robotics: Modelling and Control | UE | EN | 2 | 3 | ||||||||||
3 | Umweltschutz und -management | Environmental Protection and Management | B-2 | WP | GM | Ja | Kl | 6 | |||||||
Integrierter Umweltschutz | Integrated Pollution Control | VL | EN | 2 | 3 | ||||||||||
Sicherheits-, Gesundheits- und Umweltmanagement | Health, Safety and Environmental Management | VL | EN | 2 | 3 | ||||||||||
Sicherheits-, Gesundheits- und Umweltmanagement | Health, Safety and Environmental Management | UE | EN | 1 | 3 | ||||||||||
3-4 | Automatisierungstechnik und -systeme | Automation Technology and Systems | M-23 | WP | GM | Ja | Kl | 6 | |||||||
Handhabungs- und Montagetechnik | Handling and Assembly Systems | VL | DE | 3 | 3 | ||||||||||
Produktionsautomatisierung | Automation Technology | VL | DE | 3 | 4 | ||||||||||
3-4 | Flugphysik | Flight Physics | M-7 | WP | GM | Ja | Kl | 6 | |||||||
Aerodynamik und Flugmechanik I | Aerodynamics and Flight Mechanics I | VL | DE | 3 | 3 | ||||||||||
Flugmechanik II | Flight Mechanics II | VL | DE | 2 | 4 | ||||||||||
Flugmechanik II | Flight Mechanics II | HÜ | DE | 1 | 4 | ||||||||||
3-4 | Produktionsplanung und -steuerung und Digitales Unternehmen | Production Planning & Control and Digital Enterprise | M-18 | WP | GM | Ja | Kl | 6 | |||||||
Produktionsplanung und -steuerung | Production Planning and Control | VL | DE | 2 | 3 | ||||||||||
Produktionsplanung und -steuerung | Production Planning and Control | UE | DE | 1 | 3 | ||||||||||
Das digitale Unternehmen | The Digital Enterprise | VL | DE | 2 | 4 | ||||||||||
Übung: Das digitale Unternehmen | Exercise: The Digital Enterprise | UE | DE | 1 | 4 | ||||||||||
4 | Technischer Ergänzungskurs für PEPMS (laut FSPO) | Technical Complementary Course for PEPMS (according to Subject Specific Regulations) | M-17 | WP | GM | Ja | lt. FSPO | 6 | |||||||
Vertiefung Produktion Pflichtbereich: 18 LP Wahlpflichtbereich: 18 LP | |||||||||||||||
1 | Lasersysteme und Methoden der Fertigungsprozessauslegung und -analyse | Laser systems and methods of manufacturing design and analysis | M-18 | P | GM | Ja | Kl | 6 | |||||||
Lasersystem- und -prozesstechnik | Laser Systems and Process Technologies | VL | EN | 2 | 1 | ||||||||||
Methoden der Fertigungsprozessgestaltung | Methods of Production Process Design | VL | DE | 2 | 1 | ||||||||||
1 | Flugzeugsysteme I | Aircraft Systems I | M-7 | WP | GM | Ja | Kl | 6 | |||||||
Flugzeugsysteme I | Aircraft Systems I | VL | DE | 3 | 1 | ||||||||||
Flugzeugsysteme I | Aircraft Systems I | HÜ | DE | 1 | 1 | ||||||||||
1-2 | Automatisierungstechnik und -systeme | Automation Technology and Systems | M-23 | P | GM | Ja | Kl | 6 | |||||||
Handhabungs- und Montagetechnik | Handling and Assembly Systems | VL | DE | 3 | 1 | ||||||||||
Produktionsautomatisierung | Automation Technology | VL | DE | 3 | 2 | ||||||||||
1-2 | Produktionsplanung und -steuerung und Digitales Unternehmen | Production Planning & Control and Digital Enterprise | M-18 | P | GM | Ja | Kl | 6 | |||||||
Produktionsplanung und -steuerung | Production Planning and Control | VL | DE | 2 | 1 | ||||||||||
Produktionsplanung und -steuerung | Production Planning and Control | UE | DE | 1 | 1 | ||||||||||
Das digitale Unternehmen | The Digital Enterprise | VL | DE | 2 | 2 | ||||||||||
Übung: Das digitale Unternehmen | Exercise: The Digital Enterprise | UE | DE | 1 | 2 | ||||||||||
2 | Automation und Simulation | Automation and Simulation | M-4 | WP | GM | Ja | MdlP | 6 | |||||||
Automation und Simulation | Automation and Simulation | VL | DE | 3 | 2 | ||||||||||
Automation und Simulation | Automation and Simulation | HÜ | DE | 2 | 2 | ||||||||||
2 | Bildgebende Systeme in der Medizin | Medical Imaging Systems | M-3 | WP | GM | Ja | Kl | 6 | |||||||
Bildgebende Systeme in der Medizin | Medical Imaging Systems | VL | DE | 4 | 2 | ||||||||||
2 | Flugzeugsysteme II | Aircraft Systems II | M-7 | WP | GM | Ja | Kl | 6 | |||||||
Flugzeugsysteme II | Aircraft Systems II | VL | DE | 3 | 2 | ||||||||||
Flugzeugsysteme II | Aircraft Systems II | HÜ | DE | 1 | 2 | ||||||||||
2 | Kunststoffverarbeitung - Vom Molekül zum Composite Bauteil | Manufacturing with Polymers and Composites - From Molecule to Part | M-11 | WP | GM | Ja | SA | 6 | |||||||
Verarbeitung von Kunststoffen und Verbundwerkstoffen | Manufacturing with Polymers and Composites | VL | EN | 2 | 2 | ||||||||||
Vom Molekül zum Composite Bauteil | From Molecule to Composites Part | POL | DE/EN | 2 | 2 | ||||||||||
2 | Mechanische Eigenschaften | Mechanical Properties | M-9 | WP | GM | Ja | Kl | 6 | |||||||
Mechanisches Verhalten spröder Materialien | Mechanical Behaviour of Brittle Materials | VL | DE/EN | 2 | 2 | ||||||||||
Theorie der Versetzungsplastizität | Dislocation Theory of Plasticity | VL | DE/EN | 2 | 2 | ||||||||||
2 | Methodisches Konstruieren | Mechanical Design Methodology | G-2 | WP | GM | Ja | MdlP | 6 | |||||||
Methodisches Konstruieren | Mechanical Design Methodology | VL | DE | 3 | 2 | ||||||||||
Methodisches Konstruieren | Mechanical Design Methodology | UE | DE | 1 | 2 | ||||||||||
2 | Phänomene und Methoden der Materialwissenschaften | Phenomena and Methods in Materials Science | M-22 | WP | GM | Ja | Kl | 6 | |||||||
Experimentelle Methoden der Materialcharakterisierung | Experimental Methods for the Characterization of Materials | VL | DE/EN | 2 | 2 | ||||||||||
Phasengleichgewichte und Umwandlungen | Phase equilibria and transformations | VL | DE | 2 | 2 | ||||||||||
2 | Robotik und Navigation in der Medizin | Robotics and Navigation in Medicine | E-1 | WP | GM | Ja | Kl | 6 | |||||||
Robotik und Navigation in der Medizin | Robotics and Navigation in Medicine | VL | EN | 2 | 2 | ||||||||||
Robotik und Navigation in der Medizin | Robotics and Navigation in Medicine | UE | EN | 1 | 2 | ||||||||||
Robotik und Navigation in der Medizin | Robotics and Navigation in Medicine | PS | EN | 2 | 2 | ||||||||||
2 | Stromerzeugung aus Wind- und Wasserkraft | Electricity Generation from Wind and Hydro Power | V-9 | WP | GM | Ja | Kl | 6 | |||||||
Regenerative Energieprojekte in neuen Märkten | Renewable Energy Projects in Emerged Markets | PS | DE | 1 | 2 | ||||||||||
Wasserkraftnutzung | Hydro Power Use | VL | DE | 1 | 2 | ||||||||||
Windenergieanlagen | Wind Turbine Plants | VL | DE | 2 | 2 | ||||||||||
Windenergienutzung - Schwerpunkt Offshore | Wind Energy Use – Focus Offshore | VL | DE | 1 | 2 | ||||||||||
2 | Strömungsmaschinen | Turbomachinery | M-21 | WP | GM | Ja | Kl | 6 | |||||||
Strömungsmaschinen | Turbomachines | VL | DE | 3 | 2 | ||||||||||
Strömungsmaschinen | Turbomachines | HÜ | DE | 1 | 2 | ||||||||||
2 | Supply Chain Management | Supply Chain Management | W-2 | WP | GM | Ja | Kl | 6 | |||||||
Supply Chain Management | Supply Chain Management | POL | DE | 3 | 2 | ||||||||||
Wertschöpfungsnetzwerke | Value-Adding Networks | VL | DE | 2 | 2 | ||||||||||
2 | Systems Engineering | Systems Engineering | M-25 | WP | GM | Ja | Kl | 6 | |||||||
Systems Engineering | Systems Engineering | VL | DE | 3 | 2 | ||||||||||
Systems Engineering | Systems Engineering | HÜ | DE | 1 | 2 | ||||||||||
2-3 | Ausgewählte Themen der Produktentwicklung, Werkstoffwissenschaften und Produktion (Alternative A: 12 LP) | Selected Topics of Product Development, Materials Science and Production (Alternative A: 12 LP) | M-17 | WP | OM | 12 | |||||||||
Ja | MdlP | 3 | Angewandte Automatisierung | Applied Automation | POL | DE | 3 | 2 | |||||||
Ja | Kl | 3 | Elemente Integrierter Produktionssysteme | Elements of Integrated Production Systems | POL | DE | 2 | 2 | |||||||
Ja | MdlP | 3 | Entwicklungsmanagement Mechatronik | Development Management for Mechatronics | VL | DE | 2 | 2 | |||||||
Ja | HA | 3 | Entwurfsoptimierung und Probabilistische Verfahren in der Strukturmechanik | Design Optimization and Probabilistic Approaches in Structural Analysis | SE | DE | 3 | 2 | |||||||
Ja | MdlP | 3 | Leichtbaupraktikum | Lightweight Design Practical Course | POL | DE | 3 | 2 | |||||||
Ja | Kl | 2 | Mechanismen, Systeme und Verfahren der Werkstoffprüfung | Mechanisms, Systems and Processes of Materials Testing | VL | DE | 2 | 2 | |||||||
Ja | Kl | 3 | Metallische Werkstoffe für Luftfahrtanwendungen | Metallic Materials for Aircraft Applications | VL | EN | 2 | 2 | |||||||
Ja | SA | 3 | Model-Based Systems Engineering (MBSE) mit SysML/UML | Model-Based Systems Engineering (MBSE) with SysML/UML | POL | DE | 3 | 2 | |||||||
Ja | MdlP | 4 | Optimale und robuste Regelung | Optimal and Robust Control | VL | EN | 2 | 2 | |||||||
UE | EN | 1 | 2 | ||||||||||||
Ja | Kl | 3 | Produktivitätsmanagement | Productivity Management | UE | DE | 1 | 2 | |||||||
POL | DE | 2 | 2 | ||||||||||||
Ja | MdlP | 3 | Regelungstechnische Methoden für die Medizintechnik | Feedback Control in Medical Technology | VL | DE | 2 | 2 | |||||||
Ja | Kl | 3 | Regenerative Energien | Renewable Energy | VL | DE/EN | 2 | 2 | |||||||
UE | DE/EN | 1 | 2 | ||||||||||||
Ja | HA | 3 | Technisches Industriedesign | Technical Design | VL | DE | 2 | 2 | |||||||
Ja | Kl | 4 | Zuverlässigkeit in der Maschinendynamik | Reliability in Engineering Dynamics | VL | EN | 2 | 2 | |||||||
UE | EN | 1 | 2 | ||||||||||||
Ja | MdlP | 3 | Arbeitswissenschaft | Ergonomics | VL | DE | 2 | 3 | |||||||
Ja | Kl | 3 | Aufbau und Eigenschaften der Kunststoffe | Structure and Properties of Polymers | VL | DE | 2 | 3 | |||||||
Ja | Kl | 3 | Aufbau und Eigenschaften der Verbundwerkstoffe | Structure and Properties of Composites | VL | EN | 2 | 3 | |||||||
Ja | SA | 3 | Computer- und Kommunikationstechnik bei Kabinenelektronik und Avionik | Computer and communication technology in cabin electronics and avionics | VL | DE | 2 | 3 | |||||||
UE | DE | 1 | 3 | ||||||||||||
Ja | Re | 2 | Emotional Design / Benutzerzentrierte Produktentwicklung | Emotional Design / User Centered Product Development | SE | DE | 2 | 3 | |||||||
Ja | MdlP | 3 | Ermüdung und Schadenstoleranz | Fatigue & Damage Tolerance | VL | EN | 2 | 3 | |||||||
Ja | Kl | 3 | Fügen von Polymer-Metall Leichtbaustrukturen | Joining of Polymer-Metal Lightweight Structures | VL | EN | 2 | 3 | |||||||
PR | EN | 1 | 3 | ||||||||||||
Ja | Kl | 3 | Konstruieren mit Kunststoffen und Verbundwerkstoffen | Design with Polymers and Composites | VL | DE | 2 | 3 | |||||||
Ja | MdlP | 3 | Leichtbau mit Faserverbundwerkstoffen - Strukturmechanik | Lightweight Construction with Fibre Reinforced Rolymers - Structural Mechanics | VL | DE | 2 | 3 | |||||||
HÜ | DE | 1 | 3 | ||||||||||||
Ja | Kl | 3 | Methoden des Flugzeugentwurfs I | Aircraft Design I | VL | DE | 2 | 3 | |||||||
HÜ | DE | 1 | 3 | ||||||||||||
Ja | MdlP | 4 | Mikrosystemtechnologie | Microsystems Technology | VL | EN | 2 | 3 | |||||||
Ja | Kl | 3 | Six Sigma Methodik im Qualitätsmanagement | Six Sigma | VL | DE | 2 | 3 | |||||||
Ja | Kl | 3 | Systemanalyse im Lufttransport | System Analysis in Air Transportation | VL | DE | 3 | 3 | |||||||
Ja | Kl | 3 | Technologie keramischer Werkstoffe | Ceramics Technology | VL | DE/EN | 2 | 3 | |||||||
Ja | Kl | 2 | Werkstoffprüfung | Materials Testing | VL | DE | 2 | 3 | |||||||
Ja | Kl | 3 | Zuverlässigkeit von Flugzeugsystemen | Reliability of Aircraft Systems | VL | DE | 2 | 3 | |||||||
2-3 | Ausgewählte Themen der Produktentwicklung, Werkstoffwissenschaften und Produktion (Alternative B: 6 LP) | Selected Topics of Product Development, Materials Science and Production (Alternative B: 6 LP) | M-17 | WP | OM | 6 | |||||||||
Ja | MdlP | 3 | Angewandte Automatisierung | Applied Automation | POL | DE | 3 | 2 | |||||||
Ja | Kl | 3 | Elemente Integrierter Produktionssysteme | Elements of Integrated Production Systems | POL | DE | 2 | 2 | |||||||
Ja | MdlP | 3 | Entwicklungsmanagement Mechatronik | Development Management for Mechatronics | VL | DE | 2 | 2 | |||||||
Ja | HA | 3 | Entwurfsoptimierung und Probabilistische Verfahren in der Strukturmechanik | Design Optimization and Probabilistic Approaches in Structural Analysis | SE | DE | 3 | 2 | |||||||
Ja | MdlP | 3 | Leichtbaupraktikum | Lightweight Design Practical Course | POL | DE | 3 | 2 | |||||||
Ja | Kl | 2 | Mechanismen, Systeme und Verfahren der Werkstoffprüfung | Mechanisms, Systems and Processes of Materials Testing | VL | DE | 2 | 2 | |||||||
Ja | Kl | 3 | Metallische Werkstoffe für Luftfahrtanwendungen | Metallic Materials for Aircraft Applications | VL | EN | 2 | 2 | |||||||
Ja | SA | 3 | Model-Based Systems Engineering (MBSE) mit SysML/UML | Model-Based Systems Engineering (MBSE) with SysML/UML | POL | DE | 3 | 2 | |||||||
Ja | MdlP | 4 | Optimale und robuste Regelung | Optimal and Robust Control | VL | EN | 2 | 2 | |||||||
UE | EN | 1 | 2 | ||||||||||||
Ja | Kl | 3 | Produktivitätsmanagement | Productivity Management | UE | DE | 1 | 2 | |||||||
POL | DE | 2 | 2 | ||||||||||||
Ja | MdlP | 3 | Regelungstechnische Methoden für die Medizintechnik | Feedback Control in Medical Technology | VL | DE | 2 | 2 | |||||||
Ja | Kl | 3 | Regenerative Energien | Renewable Energy | VL | DE/EN | 2 | 2 | |||||||
UE | DE/EN | 1 | 2 | ||||||||||||
Ja | HA | 3 | Technisches Industriedesign | Technical Design | VL | DE | 2 | 2 | |||||||
Ja | Kl | 4 | Zuverlässigkeit in der Maschinendynamik | Reliability in Engineering Dynamics | VL | EN | 2 | 2 | |||||||
UE | EN | 1 | 2 | ||||||||||||
Ja | MdlP | 3 | Arbeitswissenschaft | Ergonomics | VL | DE | 2 | 3 | |||||||
Ja | Kl | 3 | Aufbau und Eigenschaften der Kunststoffe | Structure and Properties of Polymers | VL | DE | 2 | 3 | |||||||
Ja | Kl | 3 | Aufbau und Eigenschaften der Verbundwerkstoffe | Structure and Properties of Composites | VL | EN | 2 | 3 | |||||||
Ja | SA | 3 | Computer- und Kommunikationstechnik bei Kabinenelektronik und Avionik | Computer and communication technology in cabin electronics and avionics | VL | DE | 2 | 3 | |||||||
UE | DE | 1 | 3 | ||||||||||||
Ja | Re | 2 | Emotional Design / Benutzerzentrierte Produktentwicklung | Emotional Design / User Centered Product Development | SE | DE | 2 | 3 | |||||||
Ja | MdlP | 3 | Ermüdung und Schadenstoleranz | Fatigue & Damage Tolerance | VL | EN | 2 | 3 | |||||||
Ja | Kl | 3 | Fügen von Polymer-Metall Leichtbaustrukturen | Joining of Polymer-Metal Lightweight Structures | VL | EN | 2 | 3 | |||||||
PR | EN | 1 | 3 | ||||||||||||
Ja | Kl | 3 | Konstruieren mit Kunststoffen und Verbundwerkstoffen | Design with Polymers and Composites | VL | DE | 2 | 3 | |||||||
Ja | MdlP | 3 | Leichtbau mit Faserverbundwerkstoffen - Strukturmechanik | Lightweight Construction with Fibre Reinforced Rolymers - Structural Mechanics | VL | DE | 2 | 3 | |||||||
HÜ | DE | 1 | 3 | ||||||||||||
Ja | Kl | 3 | Methoden des Flugzeugentwurfs I | Aircraft Design I | VL | DE | 2 | 3 | |||||||
HÜ | DE | 1 | 3 | ||||||||||||
Ja | MdlP | 4 | Mikrosystemtechnologie | Microsystems Technology | VL | EN | 2 | 3 | |||||||
Ja | Kl | 3 | Six Sigma Methodik im Qualitätsmanagement | Six Sigma | VL | DE | 2 | 3 | |||||||
Ja | Kl | 3 | Systemanalyse im Lufttransport | System Analysis in Air Transportation | VL | DE | 3 | 3 | |||||||
Ja | Kl | 3 | Technologie keramischer Werkstoffe | Ceramics Technology | VL | DE/EN | 2 | 3 | |||||||
Ja | Kl | 2 | Werkstoffprüfung | Materials Testing | VL | DE | 2 | 3 | |||||||
Ja | Kl | 3 | Zuverlässigkeit von Flugzeugsystemen | Reliability of Aircraft Systems | VL | DE | 2 | 3 | |||||||
3 | Biomaterialien und regenerative Medizin | Biomaterials and Regenerative Medicine | M-3 | WP | GM | Ja | Kl | 6 | |||||||
Biomaterialien | Biomaterials | VL | EN | 2 | 3 | ||||||||||
Regenerative Medizin | Regenerative Medicine | SE | DE/EN | 3 | 3 | ||||||||||
3 | Flugzeug-Kabinensysteme | Aircraft Cabin Systems | M-25 | WP | GM | Ja | Kl | 6 | |||||||
Flugzeug-Kabinensysteme | Aircraft Cabin Systems | VL | DE | 3 | 3 | ||||||||||
Flugzeug-Kabinensysteme | Aircraft Cabin Systems | HÜ | DE | 1 | 3 | ||||||||||
3 | Fluidtechnik | Fluidics | M-17 | WP | GM | Ja | Kl | 6 | |||||||
Fluidtechnik | Fluidics | VL | DE | 2 | 3 | ||||||||||
Fluidtechnik | Fluidics | HÜ | DE | 1 | 3 | ||||||||||
Fluidtechnik | Fluidics | POL | DE | 1 | 3 | ||||||||||
3 | Methoden der integrierten Produktentwicklung | Methods of Integrated Product Development | M-17 | WP | GM | Ja | MdlP | 6 | |||||||
Integrierte Produktentwicklung II | Integrated Product Development II | VL | DE | 3 | 3 | ||||||||||
Integrierte Produktentwicklung II | Integrated Product Development II | POL | DE | 2 | 3 | ||||||||||
3 | Nachhaltigkeit und Risikomangement | Sustainability and Risk Management | V-9 | WP | GM | Ja | SA | 6 | |||||||
Sicherheit, Zuverlässigkeit und Risikobewertung | Safety, Reliability and Risk Assessment | SE | DE | 2 | 3 | ||||||||||
Umweltschutz und Nachhaltigkeit | Environment and Sustainability | VL | EN | 2 | 3 | ||||||||||
3 | Produktions- und Logistikmanagement | Production and Logistics Management | W-2 | WP | GM | Ja | Kl | 6 | |||||||
Operatives Produktions- und Logistikmanagement | Operative Production and Logistics Management | VL | DE | 2 | 3 | ||||||||||
Strategisches Produktions- und Logistikmanagement | Strategic Production and Logistics Management | POL | DE | 3 | 3 | ||||||||||
3 | Produktplanung | Product Planning | W-7 | WP | GM | Ja | Kl | 6 | |||||||
Produktplanung | Product Planning | POL | EN | 3 | 3 | ||||||||||
Produktplanung Seminar | Product Planning Seminar | POL | EN | 2 | 3 | ||||||||||
3 | Robotik | Robotics | M-24 | WP | GM | Ja | Kl | 6 | |||||||
Robotik: Modellierung und Regelung | Robotics: Modelling and Control | VL | EN | 3 | 3 | ||||||||||
Robotik: Modellierung und Regelung | Robotics: Modelling and Control | UE | EN | 2 | 3 | ||||||||||
3 | Umweltschutz und -management | Environmental Protection and Management | B-2 | WP | GM | Ja | Kl | 6 | |||||||
Integrierter Umweltschutz | Integrated Pollution Control | VL | EN | 2 | 3 | ||||||||||
Sicherheits-, Gesundheits- und Umweltmanagement | Health, Safety and Environmental Management | VL | EN | 2 | 3 | ||||||||||
Sicherheits-, Gesundheits- und Umweltmanagement | Health, Safety and Environmental Management | UE | EN | 1 | 3 | ||||||||||
3-4 | Flugphysik | Flight Physics | M-7 | WP | GM | Ja | Kl | 6 | |||||||
Aerodynamik und Flugmechanik I | Aerodynamics and Flight Mechanics I | VL | DE | 3 | 3 | ||||||||||
Flugmechanik II | Flight Mechanics II | VL | DE | 2 | 4 | ||||||||||
Flugmechanik II | Flight Mechanics II | HÜ | DE | 1 | 4 | ||||||||||
4 | Technischer Ergänzungskurs für PEPMS (laut FSPO) | Technical Complementary Course for PEPMS (according to Subject Specific Regulations) | M-17 | WP | GM | Ja | lt. FSPO | 6 | |||||||
Vertiefung Werkstoffe Pflichtbereich: 18 LP Wahlpflichtbereich: 18 LP | |||||||||||||||
1 | Flugzeugsysteme I | Aircraft Systems I | M-7 | WP | GM | Ja | Kl | 6 | |||||||
Flugzeugsysteme I | Aircraft Systems I | VL | DE | 3 | 1 | ||||||||||
Flugzeugsysteme I | Aircraft Systems I | HÜ | DE | 1 | 1 | ||||||||||
1-2 | Ausgewählte Themen der Produktentwicklung, Werkstoffwissenschaften und Produktion (Alternative A: 12 LP) | Selected Topics of Product Development, Materials Science and Production (Alternative A: 12 LP) | M-17 | WP | OM | 12 | |||||||||
Ja | MdlP | 3 | Arbeitswissenschaft | Ergonomics | VL | DE | 2 | 1 | |||||||
Ja | Kl | 3 | Aufbau und Eigenschaften der Kunststoffe | Structure and Properties of Polymers | VL | DE | 2 | 1 | |||||||
Ja | Kl | 3 | Aufbau und Eigenschaften der Verbundwerkstoffe | Structure and Properties of Composites | VL | EN | 2 | 1 | |||||||
Ja | SA | 3 | Computer- und Kommunikationstechnik bei Kabinenelektronik und Avionik | Computer and communication technology in cabin electronics and avionics | VL | DE | 2 | 1 | |||||||
UE | DE | 1 | 1 | ||||||||||||
Ja | Re | 2 | Emotional Design / Benutzerzentrierte Produktentwicklung | Emotional Design / User Centered Product Development | SE | DE | 2 | 1 | |||||||
Ja | MdlP | 3 | Ermüdung und Schadenstoleranz | Fatigue & Damage Tolerance | VL | EN | 2 | 1 | |||||||
Ja | Kl | 3 | Fügen von Polymer-Metall Leichtbaustrukturen | Joining of Polymer-Metal Lightweight Structures | VL | EN | 2 | 1 | |||||||
PR | EN | 1 | 1 | ||||||||||||
Ja | Kl | 3 | Konstruieren mit Kunststoffen und Verbundwerkstoffen | Design with Polymers and Composites | VL | DE | 2 | 1 | |||||||
Ja | MdlP | 3 | Leichtbau mit Faserverbundwerkstoffen - Strukturmechanik | Lightweight Construction with Fibre Reinforced Rolymers - Structural Mechanics | VL | DE | 2 | 1 | |||||||
HÜ | DE | 1 | 1 | ||||||||||||
Ja | Kl | 3 | Methoden des Flugzeugentwurfs I | Aircraft Design I | VL | DE | 2 | 1 | |||||||
HÜ | DE | 1 | 1 | ||||||||||||
Ja | MdlP | 4 | Mikrosystemtechnologie | Microsystems Technology | VL | EN | 2 | 1 | |||||||
Ja | Kl | 3 | Six Sigma Methodik im Qualitätsmanagement | Six Sigma | VL | DE | 2 | 1 | |||||||
Ja | Kl | 3 | Systemanalyse im Lufttransport | System Analysis in Air Transportation | VL | DE | 3 | 1 | |||||||
Ja | Kl | 3 | Technologie keramischer Werkstoffe | Ceramics Technology | VL | DE/EN | 2 | 1 | |||||||
Ja | Kl | 2 | Werkstoffprüfung | Materials Testing | VL | DE | 2 | 1 | |||||||
Ja | Kl | 3 | Zuverlässigkeit von Flugzeugsystemen | Reliability of Aircraft Systems | VL | DE | 2 | 1 | |||||||
Ja | MdlP | 3 | Angewandte Automatisierung | Applied Automation | POL | DE | 3 | 2 | |||||||
Ja | Kl | 3 | Elemente Integrierter Produktionssysteme | Elements of Integrated Production Systems | POL | DE | 2 | 2 | |||||||
Ja | MdlP | 3 | Entwicklungsmanagement Mechatronik | Development Management for Mechatronics | VL | DE | 2 | 2 | |||||||
Ja | HA | 3 | Entwurfsoptimierung und Probabilistische Verfahren in der Strukturmechanik | Design Optimization and Probabilistic Approaches in Structural Analysis | SE | DE | 3 | 2 | |||||||
Ja | MdlP | 3 | Leichtbaupraktikum | Lightweight Design Practical Course | POL | DE | 3 | 2 | |||||||
Ja | Kl | 2 | Mechanismen, Systeme und Verfahren der Werkstoffprüfung | Mechanisms, Systems and Processes of Materials Testing | VL | DE | 2 | 2 | |||||||
Ja | Kl | 3 | Metallische Werkstoffe für Luftfahrtanwendungen | Metallic Materials for Aircraft Applications | VL | EN | 2 | 2 | |||||||
Ja | SA | 3 | Model-Based Systems Engineering (MBSE) mit SysML/UML | Model-Based Systems Engineering (MBSE) with SysML/UML | POL | DE | 3 | 2 | |||||||
Ja | MdlP | 4 | Optimale und robuste Regelung | Optimal and Robust Control | VL | EN | 2 | 2 | |||||||
UE | EN | 1 | 2 | ||||||||||||
Ja | Kl | 3 | Produktivitätsmanagement | Productivity Management | UE | DE | 1 | 2 | |||||||
POL | DE | 2 | 2 | ||||||||||||
Ja | MdlP | 3 | Regelungstechnische Methoden für die Medizintechnik | Feedback Control in Medical Technology | VL | DE | 2 | 2 | |||||||
Ja | Kl | 3 | Regenerative Energien | Renewable Energy | VL | DE/EN | 2 | 2 | |||||||
UE | DE/EN | 1 | 2 | ||||||||||||
Ja | HA | 3 | Technisches Industriedesign | Technical Design | VL | DE | 2 | 2 | |||||||
Ja | Kl | 4 | Zuverlässigkeit in der Maschinendynamik | Reliability in Engineering Dynamics | VL | EN | 2 | 2 | |||||||
UE | EN | 1 | 2 | ||||||||||||
1-2 | Ausgewählte Themen der Produktentwicklung, Werkstoffwissenschaften und Produktion (Alternative B: 6 LP) | Selected Topics of Product Development, Materials Science and Production (Alternative B: 6 LP) | M-17 | WP | OM | 6 | |||||||||
Ja | MdlP | 3 | Arbeitswissenschaft | Ergonomics | VL | DE | 2 | 1 | |||||||
Ja | Kl | 3 | Aufbau und Eigenschaften der Kunststoffe | Structure and Properties of Polymers | VL | DE | 2 | 1 | |||||||
Ja | Kl | 3 | Aufbau und Eigenschaften der Verbundwerkstoffe | Structure and Properties of Composites | VL | EN | 2 | 1 | |||||||
Ja | SA | 3 | Computer- und Kommunikationstechnik bei Kabinenelektronik und Avionik | Computer and communication technology in cabin electronics and avionics | VL | DE | 2 | 1 | |||||||
UE | DE | 1 | 1 | ||||||||||||
Ja | Re | 2 | Emotional Design / Benutzerzentrierte Produktentwicklung | Emotional Design / User Centered Product Development | SE | DE | 2 | 1 | |||||||
Ja | MdlP | 3 | Ermüdung und Schadenstoleranz | Fatigue & Damage Tolerance | VL | EN | 2 | 1 | |||||||
Ja | Kl | 3 | Fügen von Polymer-Metall Leichtbaustrukturen | Joining of Polymer-Metal Lightweight Structures | VL | EN | 2 | 1 | |||||||
PR | EN | 1 | 1 | ||||||||||||
Ja | Kl | 3 | Konstruieren mit Kunststoffen und Verbundwerkstoffen | Design with Polymers and Composites | VL | DE | 2 | 1 | |||||||
Ja | MdlP | 3 | Leichtbau mit Faserverbundwerkstoffen - Strukturmechanik | Lightweight Construction with Fibre Reinforced Rolymers - Structural Mechanics | VL | DE | 2 | 1 | |||||||
HÜ | DE | 1 | 1 | ||||||||||||
Ja | Kl | 3 | Methoden des Flugzeugentwurfs I | Aircraft Design I | VL | DE | 2 | 1 | |||||||
HÜ | DE | 1 | 1 | ||||||||||||
Ja | MdlP | 4 | Mikrosystemtechnologie | Microsystems Technology | VL | EN | 2 | 1 | |||||||
Ja | Kl | 3 | Six Sigma Methodik im Qualitätsmanagement | Six Sigma | VL | DE | 2 | 1 | |||||||
Ja | Kl | 3 | Systemanalyse im Lufttransport | System Analysis in Air Transportation | VL | DE | 3 | 1 | |||||||
Ja | Kl | 3 | Technologie keramischer Werkstoffe | Ceramics Technology | VL | DE/EN | 2 | 1 | |||||||
Ja | Kl | 2 | Werkstoffprüfung | Materials Testing | VL | DE | 2 | 1 | |||||||
Ja | Kl | 3 | Zuverlässigkeit von Flugzeugsystemen | Reliability of Aircraft Systems | VL | DE | 2 | 1 | |||||||
Ja | MdlP | 3 | Angewandte Automatisierung | Applied Automation | POL | DE | 3 | 2 | |||||||
Ja | Kl | 3 | Elemente Integrierter Produktionssysteme | Elements of Integrated Production Systems | POL | DE | 2 | 2 | |||||||
Ja | MdlP | 3 | Entwicklungsmanagement Mechatronik | Development Management for Mechatronics | VL | DE | 2 | 2 | |||||||
Ja | HA | 3 | Entwurfsoptimierung und Probabilistische Verfahren in der Strukturmechanik | Design Optimization and Probabilistic Approaches in Structural Analysis | SE | DE | 3 | 2 | |||||||
Ja | MdlP | 3 | Leichtbaupraktikum | Lightweight Design Practical Course | POL | DE | 3 | 2 | |||||||
Ja | Kl | 2 | Mechanismen, Systeme und Verfahren der Werkstoffprüfung | Mechanisms, Systems and Processes of Materials Testing | VL | DE | 2 | 2 | |||||||
Ja | Kl | 3 | Metallische Werkstoffe für Luftfahrtanwendungen | Metallic Materials for Aircraft Applications | VL | EN | 2 | 2 | |||||||
Ja | SA | 3 | Model-Based Systems Engineering (MBSE) mit SysML/UML | Model-Based Systems Engineering (MBSE) with SysML/UML | POL | DE | 3 | 2 | |||||||
Ja | MdlP | 4 | Optimale und robuste Regelung | Optimal and Robust Control | VL | EN | 2 | 2 | |||||||
UE | EN | 1 | 2 | ||||||||||||
Ja | Kl | 3 | Produktivitätsmanagement | Productivity Management | UE | DE | 1 | 2 | |||||||
POL | DE | 2 | 2 | ||||||||||||
Ja | MdlP | 3 | Regelungstechnische Methoden für die Medizintechnik | Feedback Control in Medical Technology | VL | DE | 2 | 2 | |||||||
Ja | Kl | 3 | Regenerative Energien | Renewable Energy | VL | DE/EN | 2 | 2 | |||||||
UE | DE/EN | 1 | 2 | ||||||||||||
Ja | HA | 3 | Technisches Industriedesign | Technical Design | VL | DE | 2 | 2 | |||||||
Ja | Kl | 4 | Zuverlässigkeit in der Maschinendynamik | Reliability in Engineering Dynamics | VL | EN | 2 | 2 | |||||||
UE | EN | 1 | 2 | ||||||||||||
2 | Kunststoffverarbeitung - Vom Molekül zum Composite Bauteil | Manufacturing with Polymers and Composites - From Molecule to Part | M-11 | P | GM | Ja | SA | 6 | |||||||
Verarbeitung von Kunststoffen und Verbundwerkstoffen | Manufacturing with Polymers and Composites | VL | EN | 2 | 2 | ||||||||||
Vom Molekül zum Composite Bauteil | From Molecule to Composites Part | POL | DE/EN | 2 | 2 | ||||||||||
2 | Mechanische Eigenschaften | Mechanical Properties | M-9 | P | GM | Ja | Kl | 6 | |||||||
Mechanisches Verhalten spröder Materialien | Mechanical Behaviour of Brittle Materials | VL | DE/EN | 2 | 2 | ||||||||||
Theorie der Versetzungsplastizität | Dislocation Theory of Plasticity | VL | DE/EN | 2 | 2 | ||||||||||
2 | Phänomene und Methoden der Materialwissenschaften | Phenomena and Methods in Materials Science | M-22 | P | GM | Ja | Kl | 6 | |||||||
Experimentelle Methoden der Materialcharakterisierung | Experimental Methods for the Characterization of Materials | VL | DE/EN | 2 | 2 | ||||||||||
Phasengleichgewichte und Umwandlungen | Phase equilibria and transformations | VL | DE | 2 | 2 | ||||||||||
2 | Automation und Simulation | Automation and Simulation | M-4 | WP | GM | Ja | MdlP | 6 | |||||||
Automation und Simulation | Automation and Simulation | VL | DE | 3 | 2 | ||||||||||
Automation und Simulation | Automation and Simulation | HÜ | DE | 2 | 2 | ||||||||||
2 | Bildgebende Systeme in der Medizin | Medical Imaging Systems | M-3 | WP | GM | Ja | Kl | 6 | |||||||
Bildgebende Systeme in der Medizin | Medical Imaging Systems | VL | DE | 4 | 2 | ||||||||||
2 | Flugzeugsysteme II | Aircraft Systems II | M-7 | WP | GM | Ja | Kl | 6 | |||||||
Flugzeugsysteme II | Aircraft Systems II | VL | DE | 3 | 2 | ||||||||||
Flugzeugsysteme II | Aircraft Systems II | HÜ | DE | 1 | 2 | ||||||||||
2 | Methodisches Konstruieren | Mechanical Design Methodology | G-2 | WP | GM | Ja | MdlP | 6 | |||||||
Methodisches Konstruieren | Mechanical Design Methodology | VL | DE | 3 | 2 | ||||||||||
Methodisches Konstruieren | Mechanical Design Methodology | UE | DE | 1 | 2 | ||||||||||
2 | Robotik und Navigation in der Medizin | Robotics and Navigation in Medicine | E-1 | WP | GM | Ja | Kl | 6 | |||||||
Robotik und Navigation in der Medizin | Robotics and Navigation in Medicine | VL | EN | 2 | 2 | ||||||||||
Robotik und Navigation in der Medizin | Robotics and Navigation in Medicine | UE | EN | 1 | 2 | ||||||||||
Robotik und Navigation in der Medizin | Robotics and Navigation in Medicine | PS | EN | 2 | 2 | ||||||||||
2 | Stromerzeugung aus Wind- und Wasserkraft | Electricity Generation from Wind and Hydro Power | V-9 | WP | GM | Ja | Kl | 6 | |||||||
Regenerative Energieprojekte in neuen Märkten | Renewable Energy Projects in Emerged Markets | PS | DE | 1 | 2 | ||||||||||
Wasserkraftnutzung | Hydro Power Use | VL | DE | 1 | 2 | ||||||||||
Windenergieanlagen | Wind Turbine Plants | VL | DE | 2 | 2 | ||||||||||
Windenergienutzung - Schwerpunkt Offshore | Wind Energy Use – Focus Offshore | VL | DE | 1 | 2 | ||||||||||
2 | Strömungsmaschinen | Turbomachinery | M-21 | WP | GM | Ja | Kl | 6 | |||||||
Strömungsmaschinen | Turbomachines | VL | DE | 3 | 2 | ||||||||||
Strömungsmaschinen | Turbomachines | HÜ | DE | 1 | 2 | ||||||||||
2 | Supply Chain Management | Supply Chain Management | W-2 | WP | GM | Ja | Kl | 6 | |||||||
Supply Chain Management | Supply Chain Management | POL | DE | 3 | 2 | ||||||||||
Wertschöpfungsnetzwerke | Value-Adding Networks | VL | DE | 2 | 2 | ||||||||||
2 | Systems Engineering | Systems Engineering | M-25 | WP | GM | Ja | Kl | 6 | |||||||
Systems Engineering | Systems Engineering | VL | DE | 3 | 2 | ||||||||||
Systems Engineering | Systems Engineering | HÜ | DE | 1 | 2 | ||||||||||
3 | Biomaterialien und regenerative Medizin | Biomaterials and Regenerative Medicine | M-3 | WP | GM | Ja | Kl | 6 | |||||||
Biomaterialien | Biomaterials | VL | EN | 2 | 3 | ||||||||||
Regenerative Medizin | Regenerative Medicine | SE | DE/EN | 3 | 3 | ||||||||||
3 | Flugzeug-Kabinensysteme | Aircraft Cabin Systems | M-25 | WP | GM | Ja | Kl | 6 | |||||||
Flugzeug-Kabinensysteme | Aircraft Cabin Systems | VL | DE | 3 | 3 | ||||||||||
Flugzeug-Kabinensysteme | Aircraft Cabin Systems | HÜ | DE | 1 | 3 | ||||||||||
3 | Fluidtechnik | Fluidics | M-17 | WP | GM | Ja | Kl | 6 | |||||||
Fluidtechnik | Fluidics | VL | DE | 2 | 3 | ||||||||||
Fluidtechnik | Fluidics | HÜ | DE | 1 | 3 | ||||||||||
Fluidtechnik | Fluidics | POL | DE | 1 | 3 | ||||||||||
3 | Lasersysteme und Methoden der Fertigungsprozessauslegung und -analyse | Laser systems and methods of manufacturing design and analysis | M-18 | WP | GM | Ja | Kl | 6 | |||||||
Lasersystem- und -prozesstechnik | Laser Systems and Process Technologies | VL | EN | 2 | 3 | ||||||||||
Methoden der Fertigungsprozessgestaltung | Methods of Production Process Design | VL | DE | 2 | 3 | ||||||||||
3 | Methoden der integrierten Produktentwicklung | Methods of Integrated Product Development | M-17 | WP | GM | Ja | MdlP | 6 | |||||||
Integrierte Produktentwicklung II | Integrated Product Development II | VL | DE | 3 | 3 | ||||||||||
Integrierte Produktentwicklung II | Integrated Product Development II | POL | DE | 2 | 3 | ||||||||||
3 | Nachhaltigkeit und Risikomangement | Sustainability and Risk Management | V-9 | WP | GM | Ja | SA | 6 | |||||||
Sicherheit, Zuverlässigkeit und Risikobewertung | Safety, Reliability and Risk Assessment | SE | DE | 2 | 3 | ||||||||||
Umweltschutz und Nachhaltigkeit | Environment and Sustainability | VL | EN | 2 | 3 | ||||||||||
3 | Produktions- und Logistikmanagement | Production and Logistics Management | W-2 | WP | GM | Ja | Kl | 6 | |||||||
Operatives Produktions- und Logistikmanagement | Operative Production and Logistics Management | VL | DE | 2 | 3 | ||||||||||
Strategisches Produktions- und Logistikmanagement | Strategic Production and Logistics Management | POL | DE | 3 | 3 | ||||||||||
3 | Produktplanung | Product Planning | W-7 | WP | GM | Ja | Kl | 6 | |||||||
Produktplanung | Product Planning | POL | EN | 3 | 3 | ||||||||||
Produktplanung Seminar | Product Planning Seminar | POL | EN | 2 | 3 | ||||||||||
3 | Robotik | Robotics | M-24 | WP | GM | Ja | Kl | 6 | |||||||
Robotik: Modellierung und Regelung | Robotics: Modelling and Control | VL | EN | 3 | 3 | ||||||||||
Robotik: Modellierung und Regelung | Robotics: Modelling and Control | UE | EN | 2 | 3 | ||||||||||
3 | Umweltschutz und -management | Environmental Protection and Management | B-2 | WP | GM | Ja | Kl | 6 | |||||||
Integrierter Umweltschutz | Integrated Pollution Control | VL | EN | 2 | 3 | ||||||||||
Sicherheits-, Gesundheits- und Umweltmanagement | Health, Safety and Environmental Management | VL | EN | 2 | 3 | ||||||||||
Sicherheits-, Gesundheits- und Umweltmanagement | Health, Safety and Environmental Management | UE | EN | 1 | 3 | ||||||||||
3-4 | Automatisierungstechnik und -systeme | Automation Technology and Systems | M-23 | WP | GM | Ja | Kl | 6 | |||||||
Handhabungs- und Montagetechnik | Handling and Assembly Systems | VL | DE | 3 | 3 | ||||||||||
Produktionsautomatisierung | Automation Technology | VL | DE | 3 | 4 | ||||||||||
3-4 | Flugphysik | Flight Physics | M-7 | WP | GM | Ja | Kl | 6 | |||||||
Aerodynamik und Flugmechanik I | Aerodynamics and Flight Mechanics I | VL | DE | 3 | 3 | ||||||||||
Flugmechanik II | Flight Mechanics II | VL | DE | 2 | 4 | ||||||||||
Flugmechanik II | Flight Mechanics II | HÜ | DE | 1 | 4 | ||||||||||
3-4 | Produktionsplanung und -steuerung und Digitales Unternehmen | Production Planning & Control and Digital Enterprise | M-18 | WP | GM | Ja | Kl | 6 | |||||||
Produktionsplanung und -steuerung | Production Planning and Control | VL | DE | 2 | 3 | ||||||||||
Produktionsplanung und -steuerung | Production Planning and Control | UE | DE | 1 | 3 | ||||||||||
Das digitale Unternehmen | The Digital Enterprise | VL | DE | 2 | 4 | ||||||||||
Übung: Das digitale Unternehmen | Exercise: The Digital Enterprise | UE | DE | 1 | 4 | ||||||||||
Abschlussarbeit Pflichtbereich: 30 LP Wahlpflichtbereich: 0 LP | |||||||||||||||
4 | Masterarbeit | Master Thesis | Nicht definiert | P | GM | Ja | lt. FSPO | 30 |
1P=Pflicht, WP=Wahlpflicht
2GM=Geschlossenes Modul, OM=Offenes Modul
3Kl=Klausur, PA=Projektarbeit, SA=Schriftliche Ausarbeitung, Re=Referat, MdlP=Mündliche Prüfung, Kl=Klausur, MdlP=Mündliche Prüfung, SA=Schriftliche Ausarbeitung, HA=Hausarbeit, lt. FSPO=laut FSPO, PA lt. FSPO=Projektarbeit (laut FSPO)
4LP=Leistungspunkte
5VL=Vorlesung, SE=Seminar, UE=Gruppenübung, POL=Problemorientierte Lehrveranstaltung, PR=Laborpraktikum, PS=Projektseminar, FL=Fachlabor, HÜ=Hörsaalübung
6DE=Deutsch, EN=Englisch, DE/EN=Deutsch und Englisch
7SWS=Semesterwochenstunden